Tyler Entrance Program

Range of Program Entrances
Cunfiguration	Power/Slide Direction	Widht	Height	Operator Type
1SCO (2Z)	/	30"-60"	80"-120"	GAL
2SCO (2Z)	/	54"-96"	80"-120"	GAL
1SSS (1R/L)	Right/Left Hand power	30"-48"	80"-120"	GAL
2SSS (S2R/L)	Right/Left Hand power	30"-96"	80"-120"	GAL

Scope of Supply
Light greg prime standard
12'0" floor heights
8" C.M.U. or 3-3/4" drywall
7'0" high door opening
16 ga. Facia, covers, toe guards, - formed struts - 16 ga. Door panels
Bolted frame construction - 16 ga. Frames - square profile - 2" wide jamb
Aluminum sill
For GAL operator equipment

Range of LULA Entrances:
A typical LULA entrance is a GAL 36" x 80" 2SSS (K-19) and is bolted.
Typical wall depths are 3 3/4" drywall and 8" mansonry with a 1/2" side jamb offset.
The jamb reveals are typically 3"
The hall station cutout is 2 1/8" wide x 6 1/8" high and located in the strike jamb reveal
The distance from the finish floor to the bottom edge of the cutout is 38 15/16"

Tyler Entrance installation procedure

Please note that there may be subtle differences in the outcome of the color chart you print depending on factors such as your individual printers characteristics, paper quality, and ink cartridge type.

To avoid any order inaccuracies, please refer to the colors name and corresponding identification provided by Sherwin Williams as in the enclosed chart.

Download Color Chart (600 Kb)