K KABIN DOOR
n Cabin door type Sematic 2000 B (AP) conforming to EN81-1/2:1998 – 95/16/EC Lift Directive and GB7588:2003
n Car door opertaor with belt drive, 32 Vdc motor with optical Encoder controllerd by an elettronic card with microprocessor (SDS© DC-PWM) an integrated switching transformer
• Power supply voltage: 90-290 Vac
(115 V -20%, 230 V + 26%), 50-60 Hz
with integrated switching transformer.
• Installed power: 200 VA.
• Emergency operation 24/36Vdc
• Operating temperature range: from -10°C
to 60°C
• Operating humidity range: from 20%
to 80% non-condensing
• Integrated adjustable device for reopening
doors after detecting the presence an
obstacle
• Opening and closing speed adjustable
separately
• Self learning-cycle at the first installation
in order to acknowledge the door
dimension and set the opening and
closing curve
• Force cosing (Nudging)
o Drive SDS AC-VVVF Brushless PMS
o Handset
n Coupling expansion skate
n Header with steel plate thickness 2,5mm (powder paint RAL 7032)
n Single skinned panels with steel plate thickness 1,5mm
n Lock release key for landing doors
n Long life doors guide shoes for panels
o Car door toe guard
o Car door bottom track fixings
installation hardware and brackets
n Impact resistant packing
Panels Finishes
n Powder coating RAL 7032
o RAL colours for powder painting
o Hairline stailess-steel
o Mirror st.st. 8K
o Claddings - Stailess steel
Bottom tracks
n Aluminium bottom track
o Stailess steel bottom track
Glass
o Framed glass Flush
If cladding is required the cladding can be done only on front side or in both side
o Framed glass not Flush (step 0,5-1,5mm)
If cladding is required the cladding goes on both side
C Full (frameless) glass
Available on request (other option)
o Car door locking device conforming to
EN81-1/2 - GB7588:2003
o Cedes Detector
o Memco Detector
o Bigger carrier rollers
o Car door apron
o Car door sill brackets
o Other options | S LANDING DOOR
n
Landing door type Sematic 2000 B (AP) according to EN81-1/2:1998 – 95/16/EC Lift Directive and GB7588:2003(CTE)
n
Certified locking device in accordance to EN81-1/2:1998 – 95/16/EC Lift Directive and GB7588:2003(CTE)
n Frame complete of side posts
n Single skinned panels
n Lock release device
n Upper, lower, and side brackets for wall/frame fixing
n with toe guard
n
single skinned panels with steel plate thickness 1,5mm
n Long life guide shoes for panels
n Impact resistant packing
Panels finishes
n Powder coating RAL 7032
o RAL colours for powder painting
o Hairline stailess-steel
o Mirror st.st. 8K
o Claddings - Stailess steel
Frame finishes
n Powder coating RAL 7032
o RAL colours for powder painting
o Hairline stailess-steel
o Mirror st.st. 8K
o Claddings - Stailess steel (Not rigidized)
Glass
o Framed glass Flush
If cladding is required the cladding can be done only on front side or in both side
o Framed glass not Flush (step 0,5-1,5mm)
If cladding is required the cladding goes on both side
C Full (frameless) glass
Bottom tracks
n Aluminium bottom track
o Stailess steel bottom track
Box Frame
n 50x90mm
o 100x90mm
Available on request (other option)
o Fire Rated BS476 E 120'
o Fire Rated BS476 EI 60'
o Fire Rated BS476 EI 120'
o Fire Rated EN81-58 E 120' / EW 60'
C Fire Rated Gost 30247.3-2002 Russia E 60'
C Fire Rated Gost 30247.3-2002 Russia EI 60'
o Cut-out on side frame
o Bigger carriage rollers
o Full width angle support
o Other options
|
