Used for brushless motors (permanent magnet, synchron), speed feedback with encoder + Hall sensors, speed profile generator with fittings. Jerk limiting.
The same controller serves three kinds of brushless motors, with different capacity.
These brushless motors offer the best control of the torque, also at low motor rotation.
High energy return, no brushes, low maintenance. The brushless motors also offer a good ratio torque/space required.
| Compatibility | Notes | | Sematic 2000 B | c | | g standard
c option
NA Not Available
C custom: subject
to previous
confirmation of
technical
feasibility | | Sematic 2000 C | c | | | Sematic 2000 SC | NA | | | Sematic 2000 C-MOD | NA | | | Sematic 2000 G | c | | | Sematic 2000 HD | NA | | | Sematic 2000 R | g | | | Sematic 2000 SWS | NA | | 
| MAIN SUPPLY VOLTAGE | 90-290 Vac (115V-20%, 230V+26%), 50-60 Hz | | TYPICAL POWER CONSUMPTION | 200 VA | | PEAK POWER CONSUMPTION | 300 VA | | MOTOR OVERLOAD PROTECTION | @In <15 minutes
@2In <3 minutes | | OPERATIONAL TEMPERATURE RANGE | from -10°C to +60°C | | HUMIDITY | non-condensing between 20% and 80% | | PROTECTION | rapid cartridge fuse [5X20, 4A]
battery fuse [5X20, 8A] | | PERFORMANCE SPEED | separately adjustable for opening and closing | | REVERSAL SENSITIVITY | Variable, only operational on door closing cycle | Note:
• a microprocessor-based Door Controller
• Self-learning cycle and automated speeds profiles setting integrated 
Avaible as option
Last Update 26-04-07
|
