Used for only one type of DC (direct current) motor, speed feedback with encoder (encoder feedback), speed profile generator with fittings. Jerk limiting.
Little space required, reduced capacity.
These DC motors offer the best control of the torque, also at low motor rotation, with high energy return.
| Compatibility | Notes | | Sematic 2000 B | c | | g standard
c option
NA Not Available
C custom: subject
to previous
confirmation of
technical
feasibility | | Sematic 2000 C | c | | | Sematic 2000 SC | NA | | | Sematic 2000 C-MOD | c | | | Sematic 2000 G | NA | | | Sematic 2000 HD | NA | | | Sematic 2000 R | NA | | | Sematic 2000 SWS | NA | |
| MAIN SUPPLY VOLTAGE | Controller: 24 ± 10% Vac, 50-60 Hz
Transformer: 230 Vac - Primary (115 Vac Option)
24 Vac - Secondary | | TYPICAL POWER CONSUMPTION | 80 VA | | PEAK POWER CONSUMPTION | 100 VA | | MOTOR OVERLOAD PROTECTION | @In <15 minutes
@2In <3 minutes | | OPERATIONAL TEMPERATURE RANGE | from -10°C to +60°C | | HUMIDITY | non-condensing between 20% and 80% | | PROTECTION | rapid cartridge fuse [5x20, 4 A] | | PERFORMANCE SPEED | separately adjustable for opening and closing through regulation trimmers | | REVERSAL SENSITIVITY | variable, only operational on door close cycle; adjustable through regulation trimmer |
Available as option
Last Update 26-04-07
|
