|
Used for motors type DC (direct current), speed feedback with encoder,
speed profile generator with fittings. Jerk limiting.
The same controller serves four kinds of DC motors, with different capacity.
These DC motors offer the best control of the torque, also at low motor rotation.
High energy return.
| Compatibility | Notes | | Sematic 2000 B | g | | g standard
c option
NA Not Available
C custom: subject
to previous
confirmation of
technical
feasibility | | Sematic 2000 C | g | | | Sematic 2000 SC | g | | | Sematic 2000 C-MOD | g | | | Sematic 2000 G | g | | | Sematic 2000 HD | NA | | | Sematic 2000 R | NA | | | Sematic 2000 SWS | g | | 
| MAIN SUPPLY VOLTAGE | 90-290 Vac (115V-20%, 230V+26%), 50-60 Hz | | TYPICAL POWER CONSUMPTION | 200 VA | | PEAK POWER CONSUMPTION | 300 VA | | MOTOR OVERLOAD PROTECTION | @In <15 minutes
@2In <3 minutes | | OPERATIONAL TEMPERATURE RANGE | from -10°C to +60°C | | HUMIDITY | non-condensing between 20% and 80% | | PROTECTION | rapid cartridge fuse [5X20, 4A]
battery fuse [5X20, 8A] | | PERFORMANCE SPEED | separately adjustable for opening and closing | | REVERSAL SENSITIVITY | Variable, only operational on door closing cycle | Note:
• a microprocessor-based Door Controller
• Self-learning cycle and automated speeds profiles setting integrated 
Ø How to phisically up-grade a Sematic Encoder System© controller 1.0 - 2.0 - 2.1 with a SDS© rel.3
Ø How to up-grade the Software of the SDS© using the handset
Ø How to use the new graphical SDS© Handset 3.0 to programm the Sematic Encoder System© 1.0 - 2.0 - 2.1
 Circular Letter C-0056
(82 KB)
Available as option
Last Update 26-04-07
|
